Diagramas de cableado para ayudar con la interfaz eléctrica
Descargo de responsabilidad: Nuestros productos están en continuo desarrollo. Los vehículos producidos después de esta publicación pueden tener diferentes especificaciones y métodos de reparación. Cuando se determine que esto tiene una relación significativa con este manual, una nueva edición de este archivo actualizará los cambios.
Siempre verifique la información más reciente en la ubicación de "Diagramas de cableado".
Se recomienda encarecidamente la utilización de conectores Body Builder pedidos y proporcionados por Mack como fuente de energía, iluminación y tierra para la instalación de la carrocería, la instalación de la toma de fuerza y el funcionamiento. No se recomienda cortar los mazos de cables, ya que puede afectar a la mensajería del bus CAN. Cortar un arnés OEM anulará la garantía del arnés, en caso de que se use incorrectamente para suministrar energía al equipo de toma de fuerza. Asegúrese de consultar con su concesionario local autorizado de Mack cuando haga un pedido de camiones para asegurarse de que se suministran los conectores adecuados cuando se fabrica el vehículo.
Todos los derechos reservados. Ninguna parte de esta publicación puede ser reproducida, almacenada en un sistema de recuperación o transmitida de ninguna forma por ningún medio, electrónico, mecánico, fotocopia, grabación o de otro tipo, sin el permiso por escrito de Mack Trucks, Inc
- Enlace
- 1
- Mack Conventional-2022 MODEL YEAR (VECU5)
- VEHICLES BUILT 1/4/2021 - Current
- Enlace
- 2
- Mack TE-2022 MODEL YEAR (VECU5)
- VEHICLES BUILT 1/4/2021 AND LATER
- Enlace
- 3
- Mack LR-2022 MODEL YEAR (VECU5)
- VEHICLES BUILT 1/4/2021 AND LATER
- Enlace
- 4
- Mack LR-2022 Model Year (VECU5) NYC CNG Model Year (VECU5) NYC CNG
- VEHICLES BUILT 1/4/2021 AND LATER
- Enlace
- 5
- Mack Conventional-GEN2-US17GHG
- Anthem / AN, Pinnacle / PI, Granite / GR
- Enlace
- 5a
- Mack Conventional-GEN2-US17GHG
- Granite Snow Plow Auxiliary Lighting
- Enlace
- 6
- Mack Medium Duty
- MD6 / MD7
- Enlace
- 7
- Mack Conventional
- CXU, CHU, GU
- Enlace
- 8
- Mack Conventional with Natural Gas
- Enlace
- 9
- GU NYC
- Enlace
- 10
- LR Diesel and Natural Gas
- Enlace
- 11
- LR NYC
- Enlace
- 12
- LEU
- Enlace
- 13
- TE and MRU
- Enlace
- 14
- TE and MRU with Natural Gas
- Enlace
- 15
- TE and MRU NYC
- Built 2015 - 2018
- Enlace
- 15a
- TE and MRU NYC
- Built 2019
- Enlace
- 16
- NYC Dual Bin
- Enlace
- 17
- LR/MR/TE Preco Overlay Wiring Diagram
- Preco radar interface
Solicitar asistencia
Si todavía tiene problemas para encontrar lo que está buscando, Mack Service Operations ha creado un Grupo de Apoyo para Culturistas. No dude en ponerse en contacto con nosotros directamente.
Frequently Asked Questions
What is the minimum RPM I should operate my PTO, so that my vehicle will perform Regeneration during PTO mode?
Regeneration in PTO Mode - when a vehicle is being operated in PTO mode and a diesel particulate filter (DPF) regeneration is commanded, the engine must be run at a speed above the minimum speeds listed in the tables in Body Builder Manual, Section 9, Table of Contents / Regeneration in PTO Mode. The minimum speed setting can be affected by ambient temperature and/or altitude.
On Mack mDRIVE, with PTO engaged while in neutral, and then selecting Drive the PTO stops turning. Why?
Remember that the m DRIVE is an automated manual transmission with a clutch. With the PTO engaged while in neutral, when selecting Drive, the clutch is released, then the transmission shifts into gear. When the driver takes his foot off the brake pedal and presses the throttle pedal the clutch will reengage and the PTO will start to turn again. The transmission will not shift gears and driver is limited to about 6 MPH.
Our customer chassis has an mDRIVE and has a need for moving PTO operation. What PTO is recommended?
Transmission mounted PTO’s are primarily used for stand-still operation, with the gearbox in neutral. However it is possible to engage PTO in vehicle speeds up to 6 MPH. If the vehicle is to have a moving PTO operation, an m DRIVE with a REPTO or FEPTO is recommended.